The air conditioner is a system that makes the air in your home cleaner while also cooling it. This system consists of a compressor and evaporator unit to help make the room as cool as you wish it to be.
Your air conditioner might experience some issues from time to time. Dust, leaves, and other debris can cause the unit to be less efficient. You can do things on your own to maintain your air conditioner, so it will continue to serve you well year after year.
The most efficient ways to clean and maintain an air conditioner are the following:
- Deactivate the Power Supply
- Air Conditioner Filters
- Air Conditioner Coils and Coils Fins
- Condensate Drains
- Check the refrigerant lines
- Test the Air Conditioning Unit
- Call in a Professional for Regular Maintenance
Deactivate the Power Supply
Before you start cleaning:
1 Make sure you deactivate the power supply to the unit.
2 Shut it off at the thermostat or circuit breaker.
3 If you don’t know how to do this, call a professional HVAC service contractor to do it for you.
4 Air Conditioner Filters
An important aspect of preventive maintenance is changing your air filter regularly. You can change it monthly during scorching or cold weather conditions. During milder weather conditions, every three months is advisable. To change or clean your filter:
Pull down on the old filter and remove it by hand
Clean or replace the old filter with a new one depending on its condition. If it is still serviceable, clean it with a vacuum cleaner, wiping away excess dust and debris. But do not rinse in water or use chemicals to clean it, as that could damage it further.
Replace the filter by snapping it back into place on its metal frame if applicable to the used commercial HVAC. For safety reasons, make sure any children are out of reach when you do this.
Air Conditioner Coils and Coils Fins
Here are some tips for cleaning coils and fins on your unit:
Use a vacuum cleaner and a soft-bristle brush to clean dirt from the coils. For optimum performance, replace the air conditioner filter whenever you replace the air conditioner compressor.
If your air conditioner has fins, use a brush with excellent bristles to remove any dust and dirt that may gather there.
Occasionally, pass a stiff wire through the condensate drain to clean out any hair, dirt, and debris. If there is a clog within the condensation drain line, this will be enough to clear it.
Check the refrigerant lines
Sometimes, check the refrigerant lines in your air conditioner unit. If they are damaged or leaking insulation and oil, they can take up excessive space in your air conditioner. This must be replaced or fixed before installing a new unit, or else you will have severe problems with your new system once it is installed.
Test the Air Conditioning Unit
After you are done with the cleaning, attach the insulation to the pipes with tape and see if there is any leak. Activate the power to the condenser. Then, adjust the thermostat to the cooling mode to activate your AC system.
Call in a Professional for Regular Maintenance
If you are not experienced enough or lack knowledge about air conditioning, hiring a professional commercial HVAC contractor for regular maintenance would be better. He will inspect the unit ideally and make sure that there is no damage to any parts. For instance, during the winter season, when cold air blows, there could be damage to your coils, and these issues should be resolved on time.
Our climate change and increasing global warming have forced humanity to find alternatives to keep the environment safe and comfortable. Thus, everyone is leaving non-renewable resources and looking forward to other options. The air conditioner is one of the best examples of sustainable technologies that are environmentally friendly. It keeps the temperature favorable for us on summer and winter days. Cleaning and maintaining your unit is of paramount importance. The above-discussed methods efficiently ensure your AC unit is in good shape.
AUTHOR NAME : MILA TORRES